Article Tags

UnitySync

• Sync monitor shows ABORTED processes (even after reboot)
• 500 Internal Server Error
• 502 - Web server received an invalid response
• Access Denied when running Office 365 connection
• Access denied, Permission Denied, Bad File Descriptor, Permissions error on config.xml, config.txt, blank UI landing page or other ambiguous ‘non save’ type problems or
• Actions run from the UI crash (logs truncated, no error information provided)
• Active Directory and Exchange 20xx LDAP Attributes
• Allow legacyExchangeDN to be modified by Sync
• At a glance - current Run Status of all connections
• Automating (Scheduling) your UnitySync connections
• Automating Log File Management
• Avoid duplicates of existing Destination SMTP addresses (Dynamic Exclusions)
• Avoid looping when you are Synchronizing two (or more) directories in both directions.
• Back-up and Disaster Recovery Procedure for UnitySync Hub Server
• Backup & Restore of Installation and Configuration for all Directory Wizards software
• Bad Destination ID/Password AcceptSecurityContext error
• base64 encode a Source Attribute in UnitySync
• Can a UnitySync connection to Oracle insert the next sequential value for an ID?
• Can email notification be sent to specific people based on the connection being synced?
• Can I limit the Excludes that are applied during the Discovery phase?
• Can I modify the DN format of new objects created in Notes?
• Can I modify the DN format of objects created in Active Directory (AD)?
• Can I Sync just part of the directory?
• Can I sync sidHistory?
• Can I use CyberArk with UnitySync?
• Can I use https instead of http?
• Can not authenticate to Active Directory (AD) Domain Controller (DC)
• Can UnitySync create B2B guest accounts in o365?
• Can UnitySync exclude SMTP duplicates?
• Can UnitySync read/write secondary addressbooks?
• Can you set the proper Country Code based on the Country attribute value?
• Communication Error: Lost Source Connection
• Configured sync to write to Secondary Addressbook, but still getting errors
• Configuring Hub/Spoke Sync Environment with Dedicated Master Directory
• Configuring Lotus Notes directory for use with UnitySync
• Configuring Master/Spoke Sync Environment with Local Spoke acting as Master Directory and Hub
• Controlling Mod and NoMod of Proxyaddresses (or any multi-valued attribute, appendmulti)
• Create Join, but GC port 3268 not available
• Create/Join with Reject on Match is not finding objects on peer domains
• Creating Disabled or Enabled Active Directory (AD) User Objects with UnitySync
• Creating Linked Mailboxes in Exchange 20xx
• Creating One-To-Many Sync connections - single Source and multiple Destinations
• Custom Mapping for CSV Export connections
• Custom Mapping: Add SMTP/smtp proxyaddresses at Sync time
• Custom Mapping: Creating a Custom List Map file
• Custom Mapping: Creating a Custom Object Map file
• Custom Mapping: Creating a Custom Sourcedef file
• Custom Mapping: Creating Custom Folder or Struct Map Files
• Custom Mapping: CSV Source
• Custom Mapping: Javascript functions for eval.js
• Custom Mapping: Javascript Mapping
• Custom Mapping: LDIF output
• Custom Mapping: Lookup Tables
• Custom Mapping: Mapping Syntax
• Custom Mapping: ODBC
• Custom Mapping: Setting AD User unicode password
• Custom Mapping: Setting legacyExchangeDN on synced AD contacts
• Custom Mapping: String Manipulation
• Custom Mapping: Syncing non-smtp proxyaddresses
• Custom Mappings for Source ODBC and CSV connections
• Database Message | attempt to write a readonly database
• Database Message | UNIQUE Constraint Failed: Object.Dstdn (or Database Error | 19: Column Joinquery Is Not Unique)
• Debug logging in custom eval.js functions
• Destination msexchmasteraccountsid blank or will not sync properly
• Destination Tab Configuration: Google Workspace (formerly G Suite)
• Destination Tab Configuration: ODBC
• Destination Tab Configuration: Standard LDAP Directories
• Detecting / Avoiding Duplicate email addresses on your HUB (Master) UnitySync directory
• Discovering Hidden and/or NON Hidden source objects.
• Display Name Tab
• Display Name Tab: Advanced Parsing of Custom Source Display Names
• DNS TXT requests to dirwiz.com
• Do I need an Admin account for o365 Discovery and Sync?
• Does UnitySync support Modern Auth on O365 connections?
• Does UnitySync support startTLS?
• Does UnitySync synchronize calendar (free/busy) information?
• Does UnitySync synchronize Exchange Public Folders?
• Does UnitySync synchronize passwords?
• Does UnitySync use an intermediate DB to keep the match between different directories?
• Duplicate Dest DN (Duplicate Record) Errors
• Duplicate entries when the Source mail attribute is changed
• Duplicate LDAP Index
• Dynamic Group Generation
• Entries Ignored Objectclass
• Entries Outside Context
• Error deleting ldif.txt Permission denied: 1 Error renaming temp.txt Permission denied: 1
• Error DN Read (On Discovery)
• Error downloading software - Link Expired
• Error executing config.cgi
• Error on Sync Container creation (Fatal Error) - 50: Insufficient access
• Error on Sync to Notes Destination Constraint_Violation
• Error when starting UnitySync via dirweb - Cannot start web server, 127.0.0.1 tcp port 8080 is in use.
• Error: (500) Cannot process argument because the value of argument “path” is null
• Error: can’t write to config.txt
• Error: database disk image is malformed
• Error: Database error | 19: Column DstDn is not Unique
• Error: Del Person not found
• Error: LDAP_ALREADY_EXISTS (68) or LDAP_TYPE_OR_VALUE_EXISTS (20)
• Error: LDAP_CONSTRAINT_VIOLATION
• Error: LDAP_INSUFFICIENT_ACCESS (50)
• Error: LDAP_NO_SUCH_ATTRIBUTE
• Error: LDAP_NO_SUCH_OBJECT (32)
• Error: LDAP_REFERRAL (10) - the server is referring the client to another server
• Error: LDAP_UNWILLING_TO_PERFORM
• Error: X400 Template | Failed to Detect
• eval.js functions getsrc and getint
• Exclusions
• Existing ODBC connections stopped working
• Filters: Office 365 (O365) Discovery (v2.7.28 and newer)
• Filters: Optional LDAP Query Filter
• Finding your glibc version
• First Time UnitySync User: Linux
• First Time UnitySync User: MacOS
• First Time UnitySync User: Windows
• Forwarding UnitySync Log Files to Support
• General Tab: Forcemods
• General Tab: Logging Orphans (and deleting orphans)
• General Tab: Unsync
• Get-MailUser Get-Contact Set-Contact (et al.) is not recognized as the name of a cmdlet, function, script file, or operable program
• Google Workspace (formerly GSuite) Authorize App error 400: invalid_request
• Google Workspace (formerly GSuite) ReAuthentication returns ‘unknown’
• How can I change “Automatically update email addresses based on Recipient Policy”?
• How can I make synced objects members of an existing Destination Group?
• How can I sync Groups as Groups (List Processing)?
• How can I upload large log files to Support?
• How can I use special reserved characters literally in a custom map file?
• How do I disable the Recipient Address Policy for synced objects?
• How do I enable the Recipient Address Policy for synced objects?
• How do I assign mailboxes when I create user accounts? (Discover Forest / Exchange Info)
• How do I change my Sync now that I have migrated an Ex55 directory to Ex200x?
• How do I create an LDIF file?
• How do I delete a bad Exchange 5.5 container?
• How do I exclude Mailboxes from a specific Exchange Server?
• How do I set up LDAP SSL and Certificates in AD LDS (formerly ADAM)?
• How do I sync a binary attribute?
• How do I sync only mailboxes from a specific Exchange server?
• How do I upgrade to the latest version of UnitySync?
• How is UnitySync licensed?
• How to append ‘Origin tag’ to DisplayName of objects pulled from Master to Spoke
• How to Configure Exchange to Share SMTP Domain Name Space
• How to create an ODBC Datasource
• How To Create the AD LDS UnitySync User Account and Sync Container
• How to implement SSL/HTTPS in IIS (virtual directory)
• How to selectively sync Distribution Lists and Security Groups from an Active Directory source
• How to sync a non-default or custom attribute
• How would you Sync multiple directories?
• I cannot authenticate with Exchange 5.5 SP4
• I cannot do a wildcard search on SMTP domain in Ex55
• I only want to pull Mailbox Enabled Users from my Active Directory Source
• If Then Else logic in custom mapping
• Importing directly from a CSV data file
• Importing from a CSV data file via an ODBC Data Source
• Importing from a Source Database via ODBC Data Source
• Insert CR/LF when mapping multiple values to a multi lined destination attribute
• Intermitent O365 sync error - shell was not found
• International characters in a CSV Source connection
• IO::Socket::INET errors
• IP/Password connection Test - Does not match hostname and/or Certificate Expired
• Javascript error | TypeError: not callable
• Join Multiple Match
• LARGE Sync in processes, How can I tell how many Records Processed so far?
• LDAP - Could Not Connect, Invalid Credentials, Bad Username/ID/Password
• LDAP Return | 64: Naming violation
• LDIF File - Error | Bad file descriptor
• License Check Failure - Unlicensed Directories
• License error: You have exceeded your directory license count
• Lotus Notes - 65: Object class violation - missing required attribute(s): sn
• Lotus Notes/ Domino v6.5.4 or greater has unqiue ID attribute DominoUNID
• lsb_release -sd not found
• Mailer.exe - automatically email exported files
• Map File Definitions LDAP-LDAP
• Mass deletes on UnitySync sync run - low disk space
• Member Not Found
• Mod No Object on User or Group Add
• ModRDN - to allow CN to change on JOIN
• Move or Reinstall UnitySync
• Moving Windows UnitySync to a Linux Server
• My UnitySync license key does not work
• Non Admin vs Domain Admin for syncing to destination AD
• Notes Source connection fails to pull and Sync objects as expected
• O365 Add Fail - TaskException: There are multiple recipients matching identity
• O365 connection error: Connecting to remote server outlook.office365.com failed with the following error message : The WinRM client cannot process the request because the server name cannot be resolved
• O365 Discovery - Override to disable automatic Group discovery (membership query not needed)
• O365 Discovery - Query on Group Membership
• o365 Discovery / Sync Access to the path is denied
• O365 Discovery Error: The I/O operation has been aborted because of either a thread exit or an application request
• o365 error: Windows PowerShell is in NonInteractive mode.
• O365 Sample RBAC script to reduce permissions
• Objects successfully update in Active Directory after Sync, but Outlook does not appear to update
• ODBC Configuration Requirements
• ODBC System DSN does not show up in cnnection’s Source/Destination tab
• Office 365 (O365) Discovery Filters (v2.7.27 and older)
• Office 365 (O365) Discovery overview (v2.7.28 and newer)
• Office 365 - Error 500, Could Not Connect, Invalid Credentials, Bad Username/ID/Password
• Office 365 System Requirements (Discovery or Sync) pre-release v4.1.x
• Office 365 System Requirements (Discovery or Sync) v4.1.0
• Operations Error
• Optional override for Join, to search Domain Controller (instead of requiring Global Catalog)
• Overriding default No-Mod-Attribs
• Paging Support on Discovery - Reduce or lower paging-support
• Password encryption
• Powershell Error Crit - multi-factor authentication
• Prefilter o365 Group discovery using list-opath-filter
• Prepare Directory Servers: Active Directory (with or without Exchange)
• Prepare Directory Servers: Active Directory Lightweight Directory Services (AD LDS)
• Prepare Directory Servers: All Others
• Prepare Directory Servers: Amazon Simple AD (a component of AWS Directory Service)
• Prepare Directory Servers: Domino/Lotus Notes
• Prepare Directory Servers: Google Workspace (formerly G Suite)
• Prepare Directory Servers: Microsoft Azure
• Prepare Directory Servers: Office 365 (O365)
• Problem getting Exchange x400 (Exchange 5.5)
• Refining findstr search results
• Reformatting Display Name Values in your Destination or Source (Normalization Sync)
• Remove Struct-Search on Active Directory Discovery
• Requesting a Permanent UnitySync License Key
• Scheduled Task fails to run Sync cmd script
• Search or Sync Error 81, Error 84, Error 82 resulting in abort of Sync process
• Selectively syncing Disabled or Enabled source AD Users
• Set/Disable x400 roots
• Setting “Special Permissions” on the Active Directory Sync Container
• Setting ‘Special Permissions’ on the AD LDS Sync Container
• Setting MapiRecipient on your synced Active Directory (AD) contacts
• Setting Message Restrictions on synced contacts
• Setting showInAddressBook for synced objects
• Shell Error : Process aborted, connection in use
• shell error: Process Returned: 512 (Linux)
• SMTP Addresses Tab: Drop Proxy
• SMTP Addresses Tab: Substitute SMTP Domain
• SMTP Addresses Tab: Swap Proxy
• SMTP Addresses Tab: Swap Proxy - SwapTargetOnly
• SMTP Notifications - Attachment size exceeds limit
• Software Product Roadmap - End of Life (EOL)
• Source Tab Configuration: CSV
• Source Tab Configuration: Google Workspace (formerly GSuite)
• Source Tab Configuration: ODBC
• Source Tab Configuration: Office 365 (O365)
• Source Tab Configuration: Standard LDAP Directories
• Status files as of UnitySync v2.9
• Strong Authentication: Error message “Server requires binds to turn on integrity checking if SSL\TLS are not already active on the connection”
• Sync error: Join Match / Join Reject
• Sync phase ends with: LegacyExchangeDN Failure
• Sync Query Based (Dynamic) Distribution Lists in Active Directory
• Sync Recovery Procedure
• Sync/Join Mode - Create
• Sync/Join Modes - Join and Both (Create/Join)
• Synced contacts fail to process successfully by BPOS
• Syncing after an Exchange Migration
• Syncing certificates (base64 encoded) from ODBC/CSV to AD
• Syncing Contacts based on Group Membership in the Source Active Directory
• Syncing from scratch after an Ex55 to Ex2000 Migration
• Syncing Groups only, in a Groups as Groups sync (DNHAshGen)
• Syncing Groups which contain synced contacts as Members (DNHashGen)
• Syncing Manager from ODBC to Active Directory
• Syncing Manager value to Active Directory, when Manager’s object is outside the connection’s Destination scope
• Syncing SMTP and non SMTP ‘emailaddresses’ to o365
• Syncing source objejectsid to destination msexchmasteraccountsid
• Syncs to Exchange 2007 (or newer) set invalid value for mailnickname (alias)
• Syncs to/from Exchange 20xx supported?
• System DSN does not appear in ODBC Connection tab - pre UnitySync v2.1 and Windows 2008
• Telnet test to verify LDAP connectivity
• Test SQL and run functions not working from User Interface with ODBC using dirweb.exe
• Testing your connections using Simulation
• The Active Directory contacts created by UnitySync are not mail-enabled
• The UnitySync User Interface (UI)
• Trim DN
• Troubleshooting UnitySync error using command line shell.exe
• Troubleshooting: Log Files
• Uninstall UnitySync
• UnitySync - Discovery and Sync
• UnitySync - Limiting access to config.cgi via Internet Information Services (IIS)
• UnitySync - Slow performance in the User Interface (UI)
• UnitySync and Notes Directory Catalog
• UnitySync Connection Status Display Feature
• UnitySync email notification attachment size setting
• UnitySync Installation and Upgrade Instructions
• UnitySync is having trouble creating objects in Notes
• UnitySync licensing for on-the-fly Disaster Recovery
• UnitySync Logging and Notification functions
• UnitySync Modify Attributes functionality (Mod-Attribs)
• UnitySync Non Matching Serial error - UI and/or shell.exe show different Serial Numbers
• UnitySync ODBC configuration for Linux
• UnitySync Office 365 login requirements
• UnitySync Overview
• UnitySync Requirements for Sync/Join Mode selection of JOIN or BOTH for Active Directory (AD)
• UnitySync Server System Requirements
• UnitySync User Interface (UI) landing page loads, but connection will not load
• Unsupported browser message in Internet Explorer (Compatibility View)
• Upgrade from Previous UnitySync Version
• Upgrading to UnitySync from SimpleSync v4.x or v5.x
• Upgrading UnitySync
• Upgrading your Perl scripts to Javascript
• Users in Outlook cache mode receive NDR when sending mail
• Using a Proxy Server and Office 365
• Using Create/Join to link to existing objects after an Ex55 to Ex2000 Migration
• Using Discovery and Simulation to test changes
• Using Eval.pl and Custom Mapping to modify data at Sync time
• Using findstr to locate text in your UnitySync config/log files
• Using folders to organize multiple connections
• Using Interorg tool to sync Calendar (Free/Busy) using your Synced contacts
• Using Intvars to set connection specific variables
• Using ldapsearch (IBM/Domino/Notes)
• Using ODBC to sync to/from an Oracle database
• Using secondary notes.id to delegate rights on secondary notes addressbook
• Using separate connections to sync Users and Groups (DNHashGen)
• Using synctime-field to include time/date modified information on synced objects
• Using the Simulation Tolerance feature
• v4.1 o365 Discovery/Sync error: o365.ps1: line 45
• Viewing Synced objects via Outlook’s Address Book Views (ABV)
• Warning in logs: This version of UnitySync has reached End of Life.
• What if UnitySync doesn’t support my LDAP directory type?
• What is an LDIF file?
• What is included under my Software Maintenance Coverage?
• What key or attribute do you use to keep the objects in sync?
• What synchronization method do you use between directories (UID, timestamp etc)?
• Where can I find my UnitySync Serial Number?
• Why aren’t my connections running? Where are my connections? What is config.tmp? Why is my config.txt blank?
• Why is config.txt blank and how do I restore a blank config.txt file?
• Windows Authentication option not available in IIS (Server 2012)
• Worried about log4j vulnerability (CVE-2021-44228) ?